Ocnus.Net
News Before It's News
About us | Ocnus? |

Front Page 
 
 Africa
 
 Analyses
 
 Business
 
 Dark Side
 
 Defence & Arms
 
 Dysfunctions
 
 Editorial
 
 International
 
 Labour
 
 Light Side
 
 Research
Search

Research Last Updated: Jun 10, 2017 - 2:07:38 PM


For storing energy from renewable sources, scientists turn to antiferroelectrics
By Lisa Zyga, Phys.Org June 8, 2017
Jun 9, 2017 - 11:56:47 AM

Email this article
 Printer friendly page

One of the greatest challenges in generating energy from renewable sources is finding a way to store the continuously fluctuating energy being produced. Batteries, supercapacitors, and most other energy-storage technologies typically can't respond quickly enough to the second-by-second fluctuations inherent in wind and solar energy sources. One device that does have a sufficiently fast response is electrostatic capacitors, but their drawback is their low energy density—they simply cannot store very much energy in a given volume.

Addressing this problem, researchers in a new study have shown in simulations that antiferroelectric materials based on bismuth can potentially exhibit very high energy densities (150 J/cm3), making them a promising candidate material for electrostatic capacitors. The results point to the possibility of a high-performance, environmentally friendly energy-storage device for renewable energy sources.

The researchers, Bin Xu and Laurent Bellaiche at the University of Arkansas, and Jorge Íńiguez at the Luxembourg Institute of Science and Technology, have published a paper on their investigation of antiferroelectrics for energy storage in a recent issue of Nature Communications.
"We predict that rare-earth-substituted bismuth ferrite is a very promising system for high-power energy storage due to its high energy densities and good efficiencies, as well as its tuning flexibilities," Xu told Phys.org. "The model we developed connects the storage properties with fundamental energetic properties, which may lead to the discovery of new storage materials based on antiferroelectrics."

The key characteristic of antiferroelectric materials is that their adjacent electric dipoles point in opposite directions, which cancel out and result in a net zero polarization. As a result, the materials become ferroelectric under the application of a sufficiently large electric field. These electric properties can be easily tuned by controlling a variety of parameters.

In the new study, the scientists took advantage of this tunability to increase the energy density and efficiency of a particular lead-free antiferroelectric compound (rare-earth-substituted BiFeO3). By changing the orientation of the electric field and the rare earth composition, the researchers predicted the potential for a very high energy density and high efficiency. They expect that tuning other parameters, such as strain or the addition of other rare-earth dopants, may improve these properties even further.

The simulations also enabled the researchers to develop a model to explain the connection between the energy density and the tunable parameters investigated here. This model should also provide guidance for the development of antiferroelectric-based capacitors in the future. The researchers hope that these theoretical results will motivate efforts to experimentally demonstrate antiferroelectric materials with high energy densities

"With the model, we are interested in assessing the storage properties of known and hypothetical antiferroelectrics via high-throughput first-principles calculations," Bellaiche said. "The promising candidates will be further examined, in collaboration with experimentalists and other theorists."

Abstract

Dielectric capacitors, although presenting faster charging/discharging rates and better stability compared with supercapacitors or batteries, are limited in applications due to their low energy density. Antiferroelectric (AFE) compounds, however, show great promise due to their atypical polarization-versus-electric field curves. Here we report our first-principles-based theoretical predictions that Bi1−xRxFeO3 systems (R being a lanthanide, Nd in this work) can potentially allow high energy densities (100–150 J cm−3) and efficiencies (80–88%) for electric fields that may be within the range of feasibility upon experimental advances (2–3 MV cm−1). In addition, a simple model is derived to describe the energy density and efficiency of a general AFE material, providing a framework to assess the effect on the storage properties of variations in doping, electric field magnitude and direction, epitaxial strain, temperature and so on, which can facilitate future search of AFE materials for energy storage.


Source:Ocnus.net 2017

Top of Page

Research
Latest Headlines
How the Mountain Jews of Azerbaijan Endure
American technology boosts China’s hypersonic missile program
Meet Henrietta Wood, The Freed Slave Who Successfully Sued For Reparations
Allseas Begins Deep-Sea Trial of Polymetallic Nodule Mining System
Research sheds light on Japan’s wartime espionage network inside the United States
The Strange Mechanics of Fire Ant Rafts
Climate Change Signatures in South Asia
The frontrunners in the trillion-dollar race for limitless fusion power
Here’s the Whole Transcript of That Leaked Steve Bannon Tape, Annotated
Why did Russia help the United States during the Civil War?